Curriculum for the Master´s Programme in Lighting Design, 2017

1: Preface

Pursuant to Act 261 of March 18, 2015 on Universities (the University Act) with subsequent changes, the following curriculum is established. The programme also follows the Joint Programme Regulations and the Examination Policies and Procedures for The Faculty.

2: Basis in Ministerial orders

The Master’s programme is organised in accordance with the Ministry of Higher Education and Science’s Order no. 1328 of November 15, 2016 on Bachelor’s and Master’s Programmes at Universities (the Ministerial Order of the Study Programmes) and Ministerial Order no. 1062 of June 30, 2016 on University Examinations (the Examination Order). Further reference is made to Ministerial Order no. 258 of March 18, 2015 (the Admission Order) and Ministerial Order no. 114 of February 3, 2015 (the Grading Scale Order).

3: Campus

The programme is offered in Copenhagen.

4: Faculty affiliation

The Master’s programme falls under The Technical Faculty of IT and Design, Aalborg University.

5: Study board affiliation

The Master’s programme falls under Study Board of Media Technology

6: Affiliation to corps of external examiners

The Master’s programme is associated with the external examiners corps on Nationwide engineering examiners/Design

7: Admission requirements

Applicants with a legal right of admission (retskrav)

None

Applicants without legal right of admission

• Bachelor of Science (BSc) in Engineering (Architecture and Design), Aalborg University
• Bachelor of Science (BSc) in Engineering (Sustainable Design), Aalborg University
• Bachelor of Science (BSc) in Medialogy, Aalborg University
• Bachelor of Science (BSc) in IT, Communication and New Media, Aalborg University
• Bachelor of Science (BSc) in Engineering (Electronics and Computer Engineering), Aalborg University
• Bachelor of Science (BSc) in Engineering (Mechatronics), University of Southern Denmark
• Bachelor of Science (BSc) in Digital Media and Design. IT University of Copenhagen
• Bachelor of Science (Bsc) in Engineering (Architectural Engineering), Technical University of Denmark
• Bachelor of Science (BSc)in Engineering (Architectural Design), Aarhus University

Students with another Bachelor's degree may, upon application to the Board of Studies, be admitted after a specific academic assessment if the applicant is deemed to have comparable educational prerequisites. The University can stipulate requirements concerning conducting additional exams prior to the start of study.

8: The programme title in Danish and English

The Master’s programme entitles the graduate to the Danish designation Cand.scient. i lysdesign. The English designation is: Master of Science (MSc) in Lighting Design.

9: Programme specifications in ECTS credits

The Master’s programme is a two year, research-based, full-time study programme. The programme is set to 120 ECTS credits.

10: Rules concerning credit transfer (merit), including the possibility for choice of modules that are part of another programme at a university in Denmark or abroad

The Study Board can approve that passed programme elements from other educational programmes at the same level replaces programme elements within this programme (credit transfer).

Furthermore, the Study Board can, upon application, approve that parts of this programme is completed at another university or a further education institution in Denmark or abroad (pre-approval of credit transfer).

The Study Board’s decisions regarding credit transfer are based on an academic assessment.

11: Exemptions

The Study Board’s possibilities to grant exemption, including exemption to further examination attempts and special examination conditions, are stated in the Examination Policies and Procedures published at this website: https://www.studieservice.aau.dk/regler-vejledninger

12: Rules for examinations

The rules for examinations are stated in the Examination Policies and Procedures published at this website: https://www.studieservice.aau.dk/regler-vejledninger

13: Rules concerning written work, including the Master’s Thesis

In the assessment of all written work, regardless of the language it is written in, weight is also given to the student's formulation and spelling ability, in addition to the academic content. Orthographic and grammatical correctness as well as stylistic proficiency are taken as a basis for the evaluation of language performance. Language performance must always be included as an independent dimension of the total evaluation. However, no examination can be assessed as ‘Pass’ on the basis of good language performance alone; similarly, an examination normally cannot be assessed as ‘Fail’ on the basis of poor language performance alone.

The Study Board can grant exemption from this in special cases (e.g., dyslexia or a native language other than Danish).

The Master’s Thesis must include an English summary. If the project is written in English, the summary can be in Danish. The summary is included in the evaluation of the project as a whole.

14: Requirements regarding the reading of texts in a foreign language

At programmes that are taught in Danish, it is assumed that the student can read academic texts in modern Danish, Norwegian, Swedish and English and use reference works, etc., in other European languages. At programmes taught in English, it is assumed that the student can read academic text and use reference works, etc., in English.

15: Competence profile on the diploma

The following competence profile will appear on the diploma:

A Candidatus graduate has the following competency profile:

A Candidatus graduate has competencies that have been acquired via a course of study that has taken place in a research environment.

A Candidatus graduate is qualified for employment on the labour market based on his or her academic discipline as well as for further research (PhD programmes). A Candidatus graduate has, compared to a Bachelor, developed his or her academic knowledge and independence so as to be able to apply scientific theory and method on an independent basis within both an academic and a professional context.

16: Competence profile of the programme

A graduate of the Master’s programme has competencies acquired through an educational programme that has taken place in a research environment.

The graduate of the Master’s programme can perform highly qualified functions in the labour market on the basis of the educational programme. Moreover, the graduate has prerequisites for research (a Ph.D. programme). Compared to the Bachelor’s degree, the graduate of the Master’s programme has developed her/his academic knowledge and independence, so that the graduate can independently apply scientific theory and methods in both an academic and occupational/professional context.

The graduate of the Master’s programme

Knowledge

• Must have knowledge of theory based on the highest international research in relation to designing with daylight and electric light in virtual and real space.
• Be able to understand and synthesize at the highest international level the knowledge of light in the subject areas of architecture, media technology and engineering.
• Be able to critically relate the knowledge and understand the importance and potential of artistic and scientific innovation, creativity and entrepreneurship in designing with light
• Be able to identify scientific issues across the subject areas by designing with light

Skills

• Must master the lighting design scientific methodologies, tools and general skills related to employment within the field of lighting design
• Must be able to evaluate and select among theories, methods, tools and general skills to create new lighting analyses and solutions
• Must be able to set up new analysis and solution models on a scientific basis
• Must be able to discuss professional issues across disciplinary research-based and practice related knowledge and discuss professional and scientific problems and solutions with both peers and non-specialists

Competencies

• Must be able to manage work situations and developments that are complex, unpredictable and that require new solutions that can be used to explore and exploit the great potential of new lighting design with a media- and light technological, architectural and sustainable approach
• Must be able to independently initiate and carry out discipline-specific and cross-disciplinary collaboration by combining the art and science of designing with light
• Has the ability to apply acquired knowledge in research, innovation and practice
• Must be able to independently take responsibility for own professional development and specialisation in lighting design  

17: Structure and Contents of the programme

The programme is structured in modules and organized as a problem-based study. A module is a programme element or a group of programme elements, which aims to give students a set of professional skills within a fixed time frame specified in ECTS credits, and concluding with one or more examinations within specific exam periods. Examinations are defined in the curriculum. Each semester has an overall theme, which is reflected in the scope of the (mandatory) course modules and semester projects.

The programme is based on a combination of academic, problem-oriented and interdisciplinary approaches and organized based on the following work and evaluation methods that combine skills and reflection:

• lectures
• classroom instruction
• project work
• workshops
• exercises (individually and in groups)
• teacher feedback
• reflection
• field studies
• portfolio work

18: Overview of the programme

An overview of the ECTS credit breakdown for the various semesters by modules is shown in table form below.

In general, students may choose different options for the semester. The thesis project must have a size of at least 30 ECTS. If the thesis project is initiated in the 3rd semester it is possible to make a larger thesis project of 50 ECTS plus two courses on 3rd semester.
The following options may be chosen:

Option 1:

• 3rd semester: 20 ECTS semester project, supplemented by courses
• 4th semester: 30 ECTS thesis project

Option 2:

• 3rd semester: Project-oriented work in a company in Denmark or abroad or exchange in Denmark or abroad (in this case mandatory courses on the 3rd semester may be waived)
• 4th semester: 30 ECTS thesis project

Option 3 (Long Master´s Thesis project):

• A thesis project of 50 ECTS plus two 5 ECTS courses extending over 2 semesters

19: Additional information

The current version of the curriculum is published on the Board of Studies’ website, including more detailed information about the programme, including exams.

All students who have not participated in Aalborg University’s PBL introductory course during their Bachelor’s degree must attend the introductory course “Problem-based Learning and Project Management”. The introductory course must be approved before the student can participate in the project exam. For further information, please see the Schools website. 

20: Commencement and transitional rules

The curriculum is approved by the dean and enters into force as of September 1st 2017

Students who wish to complete their studies under the previous curriculum from 2014 must conclude their education by the summer 2019 at the latest, since examinations under the previous curriculum are not offered after this time.

21: Amendments to the curriculum and regulations

Minor editorial changes have been made during the digitalization.