Pursuant to Act 261 of March 18, 2015 on Universities (the University Act) with subsequent changes, the following curriculum for the Master's program in Manufacturing Technology is stipulated. The programme also follows the Joint Programme Regulations and the Examination Policies and Procedures for the Faculty of Engineering and Science.
The Master’s programme is organised in accordance with the Ministry of Higher Education and Science’s Order no. 1328 of November 15, 2016 on Bachelor’s and Master’s Programmes at Universities (the Ministerial Order of the Study Programmes) and Ministerial Order no. 1062 of June 30, 2016 on University Examinations (the Examination Order). Further reference is made to Ministerial Order no. 111 of January 30, 2017 (the Admission Order) and Ministerial Order no. 114 of February 3, 2015 (the Grading Scale Order) with subsequent changes.
The programme is offered in Aalborg.
The Master’s programme falls under the Faculty of Engineering and Science, Aalborg University.
The Master’s programme falls under the Study Board of Mechanical Engineering and Physics.
The Master’s programme is associated with the external examiners corps on Nationwide engineering examiners/Machine.
Applicants with a legal right of admission (retskrav):
Applicants without a legal right of admission:
Bachelor’s programmes qualifying students for admission:
Students with another Bachelor degree may, upon application to the Board of Studies, be admitted following a specific academic assessment if the applicant is considered as having comparable educational prerequisites. The University can stipulate requirements concerning conducting additional exams prior to the start of study.
The Master’s programme entitles the graduate to the Danish designation Civilingeniør, cand.polyt. i virksomhedsteknologi. The English designation is: Master of Science (MSc) in Engineering (Manufacturing Technology).
The Master’s programme is a 2-year, research-based, full-time study programme. The programme is set to 120 ECTS credits.
The Study Board can approve that passed programme elements from other educational programmes at the same level replaces programme elements within this programme (credit transfer).
Furthermore, the Study Board can, upon application, approve that parts of this programme is completed at another university or a further education institution in Denmark or abroad (pre-approval of credit transfer).
The Study Board’s decisions regarding credit transfer are based on an academic assessment.
The Study Board’s possibilities to grant exemption, including exemption to further examination attempts and special examination conditions, are stated in the Examination Policies and Procedures published at this website: https://www.studieservice.aau.dk/regler-vejledninger
The rules for examinations are stated in the Examination Policies and Procedures published at this website: https://www.studieservice.aau.dk/regler-vejledninger
In the assessment of all written work, regardless of the language it is written in, weight is also given to the student's formulation and spelling ability, in addition to the academic content. Orthographic and grammatical correctness as well as stylistic proficiency are taken as a basis for the evaluation of language performance. Language performance must always be included as an independent dimension of the total evaluation. However, no examination can be assessed as ‘Pass’ on the basis of good language performance alone; similarly, an examination normally cannot be assessed as ‘Fail’ on the basis of poor language performance alone.
The Study Board can grant exemption from this in special cases (e.g., dyslexia or a native language other than Danish).
The Master’s Thesis must include an English summary. If the project is written in English, the summary can be in Danish. The summary is included in the evaluation of the project as a whole.
It is assumed that the student is able to read academic texts in modern Danish, Norwegian, Swedish and English and use reference works, etc., in other European languages.
The following competence profile will appear on the diploma:
A Candidatus graduate has the following competency profile:
A Candidatus graduate has competencies that have been acquired via a course of study that has taken place in a research environment.
A Candidatus graduate is qualified for employment on the labour market based on his or her academic discipline as well as for further research (PhD programmes). A Candidatus graduate has, compared to a Bachelor, developed his or her academic knowledge and independence so as to be able to apply scientific theory and method on an independent basis within both an academic and a professional context.
The graduate of the Master’s programme:
The MSc programme in Manufacturing Technology aims at providing graduates with competences to solve complex production-related problems and is designed to develop both theoretical understanding and practical experience. The programme focuses on design, development and implementation of products, manufacturing and control systems; primarily in relation to development, planning and implementation of industrial production.
The programme is structured giving the graduate the opportunity to specialise within specific areas; e.g. virtual product- and process development, material- and process technology and operation and robot technology. The specialisation is carried out through the project work.
The programme is structured in modules and organised as a problem-based study. A module is a programme element or a group of programme elements which aim to give students a set of professional skills within a fixed time frame specified in ECTS credits, and concluding with one or more examinations within specific exam periods defined in the curriculum.
The programme is based on a combination of academic, problem-oriented and interdisciplinary approaches and organised based on the following work and evaluation methods that combine skills and reflection:
All modules are assessed through individual grading according to the 7-point scale or Pass/Fail. All modules are assessed by external examination (external grading) or internal examination (internal grading or by assessment by the supervisor only).
|Module name||Course type||ECTS||Applied grading scale||Evaluation method||Assessment method||Language|
|Manufacturing Technology||Project||15||7-point grading scale||Internal examination||Oral exam based on a project||English|
|Course for students having a bachelor within Mechanical Engineering and Manufacturing or similar||Course||15|
|Courses for students having a bachelor in Robotics or similar||Course||15|
|Development of Manufacturing Systems||Project||15||7-point grading scale||External examination||Oral exam based on a project||English|
|Courses for students having a bachelor within Mechanical Engineering and Manufacturing or similar||Course||15|
|Courses for students having a bachelor in Robotics or similar||Course||15|
|Technological Innovation||Project||30||7-point grading scale||Internal examination||Oral exam based on a project||English|
|Academic Internship||Project||30||7-point grading scale||Internal examination||Oral exam based on a project||English|
|Long Master’s Thesis||Project||60||7-point grading scale||External examination||Master's thesis/final project||English|
|Master’s Thesis||Project||30||7-point grading scale||External examination||Master's thesis/final project||English|
Students having a bachelor within Mechanical Engineering and Manufacturing or similar follow the course "Non-linear Finite Element – Applied on Materials processing". Students having a bachelor in Robotics or similar follow the course "Machine Learning".
Students having a bachelor within Mechanical Engineering and Manufacturing or similar follow the course "Robot Vision". Students having a bachelor in Robotics or similar follow the course "Digital Manufacturing".
The 3rd semester offers different ways of organisation – depending on the student’s choice of content; traditional project work at Aalborg University, study visit at an educational institution in Denmark or abroad, voluntary traineeship with project work at a company in Denmark or abroad, or a semester programme that comprises cross-disciplinary programme elements composed by the student. The total work load of the semester must be equivalent to 30 ECTS.. The project may be finalised with a project report or in the form of a scientific paper, or, if the project is continued on the 4th semester, with a midterm evaluation. For further information about the organisation of the module, please see the Joint programme regulations and the study guide for the MSc programme in Manufacturing Technology.
On the 4th semester, the Master’s Thesis is completed. The Master’s Thesis may be combined with the 3rd semester in an extended Master’s Thesis.
The current version of the curriculum is published on the study board’s website, including more detailed information about the programme, including exams.
All students who have not participated in Aalborg University’s PBL introductory course during their Bachelor’s degree must attend the introductory course “Problem-based Learning and Project Management”. The introductory course must be approved before the student can participate in the project exam.
The curriculum is approved by the Dean of the Faculty of Engineering and Science and enters into force as of September 2017.
Students who wish to complete their studies under the previous curriculum from 2016 must conclude their education by the summer examination period 2018 at the latest, since examinations under the previous curriculum are not offered after this time.
Minor editorial changes have been made in connection with digitisation of the study curriculum.