Pursuant to Act 261 of March 18, 2015 on Universities (the University Act) with subsequent changes, the following curriculum for the Master's programme in Entrepreneurial Engineering is stipulated. The programme also follows the Joint Programme Regulations and the Examination Policies and Procedures for the Technical Faculty of IT and Design, the Faculty of Engineering and Science and the Faculty of Medicine.
The Master’s programme is organised in accordance with the Ministry of Higher Education and Science’s Order no. 1061 of June 30, 2016 on Bachelor’s and Master’s Programmes at Universities (the Ministerial Order of the Study Programmes) and Ministerial Order no. 1062 of June 30, 2016 on University Examinations (the Examination Order). Further reference is made to Ministerial Order no. 258 of March 18, 2015 (the Admission Order) and Ministerial Order no. 114 of February 3, 2015 (the Grading Scale Order) with subsequent changes.
The programme is offered in Aalborg.
The Master’s programme falls under the Faculty of Engineering and Science, Aalborg University.
The Master’s programme falls under the Study Board of Materials and Production.
The Master’s programme is associated with the external examiners corps on the Nationwide engineering examiners/Machine.
Applicants with one of the following degrees are entitled to admission:
Applicants without legal claim to admission:
Other professional bachelor degrees from the technical science or natural science field may be admitted upon specific academic assessment by the Board of Studies.
Students with another Bachelor degree may, upon application to the Board of Studies, be admitted upon a specific academic assessment if the applicant is considered as having comparable educational prerequisites. The University may stipulate requirements concerning conducting additional exams prior to the start of study.
The basic education as bachelor, diploma engineer or similar must contain an element of innovation/business creation/business understanding corresponding to minimum 10 ECTS (acquired through projects or courses).
Since the education is conducted in English there is a minimum requirement of English capabilities at level B or similar internationally acknowledged tests cf. § 6 in declaration number 213 dated 21/02/2012 regarding admission a.o. for bachelor´s and master´s programmes at the universities (notification of admission/adgangsbekendtgørelsen)
From September 2018 Mathematics C or documentation of equivalent qualifications is required.
The Master’s programme entitles the graduate to the Danish designation Cand.tech. i forretningsinnovation. The English designation is: Master of Science (MSc) in Technology (Entrepreneurial Engineering).
The Master’s programme is a 2-year, research-based, full-time study programme. The programme is set to 120 ECTS credits.
The Study Board can approve successfully completed (passed) programme elements from other Master’s programmes in lieu of programme elements in this programme (credit transfer). The Study Board can also approve successfully completed (passed) programme elements from another Danish programme or a programme outside of Denmark at the same level in lieu of programme elements within this curriculum. Decisions on credit transfer are made by the Study Board based on an academic assessment. See the Joint Programme Regulations for the rules on credit transfer.
In exceptional circumstances, the Study Board study can grant exemption from those parts of the curriculum that are not stipulated by law or ministerial order. Exemption regarding an examination applies to the immediate examination.
The rules for examinations are stated in the Examination Policies and Procedures published by the faculty on their website.
In the assessment of all written work, regardless of the language it is written in, weight is also given to the student's formulation and spelling ability, in addition to the academic content. Orthographic and grammatical correctness as well as stylistic proficiency are taken as a basis for the evaluation of language performance. Language performance must always be included as an independent dimension of the total evaluation. However, no examination can be assessed as ‘Pass’ on the basis of good language performance alone; similarly, an examination normally cannot be assessed as ‘Fail’ on the basis of poor language performance alone.
The Study Board can grant exemption from this in special cases (e.g., dyslexia or a native language other than Danish).
The Master’s Thesis must include an English summary (or another foreign language: French, Spanish or German upon approval by the Study Board). If the project is written in English, the summary must be in Danish (The Study Board can grant exemption from this). The summary must be at least 1 page and not more than 2 pages (this is not included in any fixed minimum and maximum number of pages per student). The summary is included in the evaluation of the project as a whole.
At programmes taught in Danish, it is assumed that the student can read academic texts in modern Danish, Norwegian, Swedish and English and use reference works, etc., in other European languages. At programmes taught in English, it is assumed that the student can read academic text and use reference works, etc., in English.
The following competence profile will appear on the diploma:
A Candidatus graduate has the following competency profile:
A Candidatus graduate has competencies that have been acquired via a course of study that has taken place in a research environment.
A Candidatus graduate is qualified for employment on the labour market based on his or her academic discipline as well as for further research (PhD programmes). A Candidatus graduate has, compared to a Bachelor, developed his or her academic knowledge and independence so as to be able to apply scientific theory and method on an independent basis within both an academic and a professional context.
The graduate of the Master’s programme:
The programme is structured in modules and organised as a problem-based study. A module is a programme element or a group of programme elements aiming to give students a set of professional skills within a fixed time frame specified in ECTS credits, and concluding with one or more examinations within specific exam periods that are defined in the curriculum.
The programme is based on a combination of academic, problem-oriented and interdisciplinary approaches and organised based on the following work and evaluation methods that combine skills and reflection:
The table below gives an overview of the project modules and course modules that need to be completed during the four Semesters of the master´s programme.
All modules are assessed through individual grading according to the 7-point scale or Pass/Fail. All modules are assessed by external examination (external grading) or internal examination (internal grading or by assessment by the supervisor only).
|Module name||Course type||ECTS||Applied grading scale||Evaluation method||Assessment method|
|Entrepreneurial Practice||Project||15||7-point grading scale||Internal examination||Oral exam based on a project|
|Agile Business Navigation||Course||5||Passed/Not Passed||Internal examination||Written or oral exam|
|Design Based Innovation||Course||5||7-point grading scale||Internal examination||Written or oral exam|
|Understanding Entrepreneurship||Course||5||7-point grading scale||Internal examination||Written or oral exam|
|Entrepreneurial Tactics||Project||15||7-point grading scale||External examination||Oral exam based on a project|
|Corporate Entrepreneurship||Course||5||7-point grading scale||Internal examination||Written or oral exam|
|Applied Business Modelling||Course||5||7-point grading scale||Internal examination||Written or oral exam|
|Markets, Resources and Entrepreneurship||Course||5||7-point grading scale||Internal examination||Written or oral exam|
|Entrepreneurial Strategy||Project||30||7-point grading scale||Internal examination||Written or oral exam|
|Traineeship||Project||30||7-point grading scale||Internal examination||Written or oral exam|
|Long Master’s Thesis||Project||60||7-point grading scale||External examination||Master's thesis/final project|
|Master’s Thesis||Project||30||7-point grading scale||External examination||Master's thesis/final project|
The 3rd Semester offers different ways of organisation – depending on the student’s choice of content; traditional project work at Aalborg University, study visit at an educational institution in Denmark or abroad, voluntary academic internship with project work at a company in Denmark or abroad, or a Semester programme that comprises cross-disciplinary programme elements composed by the student. The total work load of the Semester must be equivalent to 30 ECTS. The project may be finalised with a project report or in the form of a scientific paper, or, if the project is continued on the 4th Semester, with a midterm evaluation.The academic traineeship has to be approved by the study board before the beginning of the Semester.
The master thesis can be conducted as a long master thesis using both the 3rd and 4th Semester. If choosing to do a long master thesis, it has to include experimental work and has to be approved by the study board.
The current version of the curriculum is published on the Board of Studies’ website, including more detailed information about the programme, including exams.
All students who have not participated in Aalborg University’s PBL introductory course during their Bachelor’s degree must attend the introductory course “Problem-based Learning and Project Management”. The introductory course must be approved before the student can participate in the project exam.
The curriculum is approved by the Dean of the Faculty of Engineering and Science and enters into force as of September 2017.
Students who wish to complete their studies under the previous curriculum from 2013 must conclude their education by the summer examination period 2018 at the latest, since examinations under the previous curriculum are not offered after this time.
In accordance with the Joint Programme Regulations for the Faculty of Engineering and Science, the curriculum must be revised no later than five years after its entry into force.
Minor editorial changes have been made in connection with digitisation of the study curriculum.
April 9, 2019: Starting from September 2018 Mathematics C or documentation of equivalent qualifications is required.