Curriculum for the Master of Science Programme in Advanced Power Electronics, 2023

1: Preface

Pursuant to consolidation Act 778 of August 7, 2019 on Universities (the University Act), the following is established.

The programme also follows the Examination Policies and Procedures incl. the Joint Programme Regulations for Aalborg University.

2: Basis in Ministerial orders

The Master’s programme is organised in accordance with the Ministry of Higher Education and Science’s  Order no. 2285 of December 1, 2021 on Full-time University Programmes (the University Programme Order) and Ministerial Order no. 2271 of December 1, 2021 on University Examinations (the Examination Order). Further reference is made to Ministerial Order no. 35 of January 13, 2023 (the Admission Order) and Ministerial Order no. 1125 of July 4, 2022 (the Grading Scale Order).

3: Campus

The programme is offered in Esbjerg.

4: Faculty affiliation

The Master’s programme falls under the The Faculty of Engineering and Science, Aalborg University.

5: Study board affiliation

The Master’s programme falls under the Study Board of Build, Energy, Electronics and Mechanics in Esbjerg.

6: Affiliation to corps of external examiners

The Master's programme is affiliated to the Civil engineering corps of external examiners.

7: Admission requirements

Applicants with a legal claim to admission (retskrav)

• Bachelor of Science (BSc) in Engineering (Applied Industrial Electronics), Aalborg University

Applicants without a legal claim to admission

• Bachelor of Science (BSc) in Engineering (Energy Engineering with specialisation in Electrical Energy), Aalborg University
• Bachelor of Science (BSc) in Engineering (Energy Engineering with specialisation in Mechatronics), Aalborg University
• Bachelor of Science (BSc) in Engineering (Energy Engineering with specialisation in Dynamic Systems), Aalborg University
• Bachelor of Science (BSc) in General Engineering, Aalborg University, campus Aalborg (with the specialisation in Electrical and Control Engineering)

Students with the following bachelor’s degrees might be admitted if they have chosen electable courses with a minimum of 5 ECTS within electrical machines and 5 ECTS within power electronics:

• Bachelor of Science in Electrical Engineering from Danish Technical University
• Bachelor of Engineering in Electrical Engineering from Danish Technical University
• Bachelor of Engineering in Electronics from Southern Danish University
• Bachelor of Engineering in Electrical Power Technology from Aarhus University

Applicants without a qualifying bachelor’s degree

If your bachelor’s degree is not mentioned under the above admission bachelor’s degrees, you can still apply for admission.

The university's assessment of a bachelor's degree emphasizes sufficient qualifications in mathematics and physics. In addition, basic qualifications in control theory, electrical systems and programming languages are assessed.

When you apply for admission, an individual professional assessment of your qualifications will be carried out in relation to these specific requirements for subjects or subject areas, calculated in ECTS:

• Mathematics skills at bachelor's level with a scope of at least 20 ECTS, covering the subjects: calculus, linear algebra, probability, statistics and numerical methods.
• Physics skills at bachelor's level with a scope of at least 10 ECTS, which cover the subjects: classical physics and basic electrical subjects, as well as basic knowledge of energy systems
• Competences at bachelor's level with a scope of at least 5 ECTS, which cover basic control theory and digital control
• Competences at bachelor's level with a scope of at least 10 ECTS, covering the subjects: electrical machines and power electronics
• Competences at bachelor's level with a scope of at least 10 ECTS, which cover programming languages

All applicants without a legal claim must prove that their English language qualifications is equivalent to level B (Danish level) in English

8: The programme title in Danish and English

The Master’s programme entitles the graduate to the designation: Civilingeniør, Cand. polyt. i avanceret effektelektronik. The English designation is: Master of Science (MSc) in Engineering (Advanced Power Electronics).

9: Programme specifications in ECTS credits

The Master’s programme is a 2-year, research-based, full-time study programme. The programme is set to 120 ECTS credits.

10: Rules concerning credit transfer (merit), including the possibility for choice of modules that are part of another programme at a university in Denmark or abroad

The Study Board can approve that passed programme elements from other educational programmes at the same level replaces programme elements within this programme (credit transfer).

Furthermore, the Study Board can, upon application, approve that parts of this programme is completed at another university or a further education institution in Denmark or abroad (pre-approval of credit transfer).

The Study Board’s decisions regarding credit transfer are based on an academic assessment.

11: Exemptions

The Study Board’s possibilities to grant exemption, including exemption to further examination attempts and special examination conditions, are stated in the Examination Policies and Procedures published at this website: https://www.studyservice.aau.dk/rules

12: Rules for examinations

The rules for examinations are stated in the Examination Policies and Procedures published at this website: https://www.studyservice.aau.dk/rules

13: Rules concerning written work, including the Master’s Thesis

In the assessment of all written work, regardless of the language it is written in, weight is also given to the student's formulation and spelling ability, in addition to the academic content. Orthographic and grammatical correctness as well as stylistic proficiency are taken as a basis for the evaluation of language performance. Language performance must always be included as an independent dimension of the total evaluation. However, no examination can be assessed as ‘Pass’ on the basis of good language performance alone; similarly, an examination normally cannot be assessed as ‘Fail’ on the basis of poor language performance alone.

The Study Board can grant exemption from this in special cases (e.g., dyslexia or a native language other than Danish).

The Master’s Thesis must include an English summary. If the project is written in English, the summary can be in Danish. The summary is included in the evaluation of the project as a whole.

14: Requirements regarding the reading of texts in a foreign language

It is assumed that the student can read academic texts in his or her native language as well as in English and use reference works, etc., in other European languages.

15: Competence profile on the diploma

The following competence profile will appear on the diploma:

A Candidatus graduate has the following competency profile:

A Candidatus graduate has competencies that have been acquired via a course of study that has taken place in a research environment.

A Candidatus graduate is qualified for employment on the labour market based on his or her academic discipline as well as for further research (PhD programmes). A Candidatus graduate has, compared to a Bachelor, developed his or her academic knowledge and independence so as to be able to apply scientific theory and method on an independent basis within both an academic and a professional context.

16: Competence profile of the programme

The graduate of the Master’s programme has the following qualifications:

Knowledge

• Knowledge about the state-of-the-art research within their field of specialisation
• Knowledge on a scientific basis to reflect over subject areas related to advanced power electronics and identify scientific problems of different types within that area
• Knowledge about the ethics related to the social, economic and environmental impact of research
• Knowledge and comprehension within innovation and entrepreneurship in relation to project work and courses
• Advanced skills in probability theory and statistics, reliability, system identification and diagnosis, advanced control methods, simulation techniques and optimisation
• Knowledge about artificial intelligence
• Advanced knowledge and comprehension within efficient usage of electrical energy, intelligent energy conversion using power electronic systems and electrical machines
• Understanding of the operation, function and interaction between various components and sub-systems used in power electronic converters, electrical machines and adjustable speed drives
• Knowledge enabling the design, modelling, simulation and synthesis of power converter-based systems used for conversion of electrical energy

Skills

• Be proficient in the scientific methods, tools and general skills related to employment within the subjects of advanced power electronics
• Have obtained advanced skills in simulation techniques and mathematical methods
• Be able to evaluate and select among the scientific theories, methods, tools and general skills of the subject area(s) and, on a scientific basis, develop new analyses and solutions
• Be able to communicate research-based knowledge and discuss professional and scientific problems with both peers and non-specialists
• Be able to obtain skills which are related to his/her field within advanced power electronics
• Be able to use advanced laboratory test set-ups and data collection methods
• Experience in the design of controllers for power electronic drive systems using classical and modern control theory
• Experience with the practical implementation of controllers using for example digital signal processors
• The ability to develop, construct, operate and test power electronic converters and drives in the laboratory
• Experience in relation to renewable energy and grid connected converters

Competences

• Be able to demonstrate an understanding of research work and be able to become a part of a research environment
• Be able to manage work and development in situations that are complex, unpredictable and require new solutions within the area of energy engineering
• Be able to independently initiate and implement discipline-specific and interdisciplinary cooperation and assume professional responsibility
• Be able to independently take responsibility for own professional development and specialisation and be able to collaborate in groups according to the PBL Model
• Be able to work with different kinds of projects like discipline oriented, cross-disciplinary projects, multi projects (where several groups within the department are working together on a larger project, solving different parts of the project) and MEGA projects (where groups from several departments are involved in a large project contributing each within their specific area for a total solution).

Upon completion of the MSc programme, the student has achieved advanced professional competences in advanced power electronics and electrical machines together with design, control, modelling, simulation and optimisation of energy or mechatronic systems. The competences should advance the student’s ability to perform in functions within planning, development, consulting and research in Danish as well as international industries or public institutions. Examples could be research and development departments or top management positions in energy supply companies, such as wind power, machine manufacturing, or process industries as well as electro-technical and consultancy companies, etc.

17: Structure and Contents of the programme

The programme is structured in modules and organised as a problem-based study. A module is a programme element or a group of programme elements, which aims to give students a set of professional skills within a fixed time frame specified in ECTS credits, and concluding with one or more examinations within specific exam periods. Examinations are defined in the modules of the present curriculum.

The programme is based on a combination of academic, problem-oriented and interdisciplinary approaches and organised based on the following work and evaluation methods that combine skills and reflection:

• lectures
• project work
• workshops
• exercises (individually and in groups)
• e-learning in different ways such as flipped class-room, blended learning, game or quiz, etc.
• teacher feedback
• reflection
• portfolio work
• study circle
• self-study

1st to 4th semesters of the programme are taught in English, and projects are to be written in English.

AAU Micro

AAU Micro are small e-learning modules of limited, well-defined scope. AAU Micro modules are extra-curricular but may be employed to support learning in curricular course and project modules.  

18: Overview of the programme

All modules are assessed through individual grading according to the 7-point grading scale or Passed/Not passed. All modules are assessed by the supervisor/lecturer together with an external examiner  (external assessment) or with an additional examiner (internal assessment).

Instead of doing the project work and the elective courses, the student can do project work in a company as an individual or as a part of a group. See details in Moodle. However, the student’s special preferences for the semester must be approved by the Study Board in advance.

Elective courses on 3rd semester MSc

In addition to the project work "Advanced Control in Industrial Electronics", the student can choose 10 ECTS courses on the 3rd semester. The Study Board offers a portfolio of elective courses covering the technical aspects for the Advanced Power Electronics programme with reference to well-defined research programmes which reflect the current research focus of the Department of Energy. Each year the Study Board selects a number of the courses below to be announced as the year’s elective courses (6 to 10). Based on the number of students assigned to each of these courses, 2 to 6 courses will be taught.

The elective courses approved by the Study Board are given in the following overview

19: Additional information

All students, who have not participated in Aalborg University’s PBL introductory course during their Bachelor’s degree, must attend the introductory course “Problem-based Learning and Project Management”. The introductory course must be approved before the student can participate in the project exam. For further information, please see the module description.

The current version of the study curriculum is published on the Aalborg University website for study curricula and the Study Board's website.

Additional information about semester descriptions is available in Moodle. Moodle provides study-related information, i.e. course descriptions, course literature, timetables and information about activities and events.

20: Commencement and transitional rules

The curriculum is approved by the dean and enters into force as of September 1, 2023.

The Study Board does not offer teaching after the previous curriculum from 2022 after the summer examination 2024.

The Study Board will offer examinations after the previous curriculum, if there are students who have used examination attempts in a module without passing. The number of examination attempts follows the rules in the Examination Order.

21: Amendments to the curriculum and regulations

The Vice-dean has on March 9, 2023, approved a revision of the type of exam in the module ”Dynamic Modelling of Electrical Machines and Control Systems” valid as of spring 2024.

1 July 2023: The Vice-dean of education has approved a larger revision of the elective catalogue. It will be replaced with a new version, valid from autumn 2023.

The Vice-dean has on October 9, 2023, approved that the following electives will be offered valid as of autumn 2024:

• “Artificial Intelligence in Energy Systems”
• ”Biofuels and CCU-based E-Fuels"

The Vice-dean has on November 24, 2023, approved an addition of Micro Modules in section 17, valid from spring 2024.

The Vice-dean has on January 10, 2024, approved a revision of the type of exam in the modules ”Advanced Modelling and Control of Voltage Source Converters” and "Modern Power Electronic Devices and their Models", valid from autumm 2024.

The Vice-dean has on March 17, 2024, has approved the addition of the module "Hybrid Power Plants" as an elective course on the 3rd semester, valid from autumm 2024.