Bachelor of Science (BSc) in Engineering (Robotics), 2018

1: Preface

Pursuant to Act 261 of March 18, 2015 on Universities (the University Act) with subsequent changes, the following curriculum is established. The programme also follows the Joint Programme Regulations and the Examination Policies and Procedures for The Faculty.

2: Basis in ministerial orders

The Bachelor’s programme is organised in accordance with the Ministry of Higher Education and Science’s Order no. 1328 of November 15, 2016 on Bachelor’s and Master’s Programmes at Universities (the Ministerial Order of the Study Programmes) and Ministerial Order no. 1062 of June 30, 2016 on University Examinations (the Examination Order). Further reference is made to Ministerial Order no. 110 of January 30, 2017 (the Admission Order) and Ministerial Order no. 114 of February 3, 2015 (the Grading Scale Order) with subsequent changes.

3: Campus

The programme is offered in Aalborg.

4: Faculty affiliation

The Bachelor’s programme falls under The Technical Faculty of IT and Design, Aalborg University.

5: Study board affiliation

The Bachelor’s programme falls under Study Board of Electronics and IT

6: Affiliation to corps of external examiners

The Bachelor’s programme is associated with the external examiners corps on Nationwide engineering examiners/Electronics, IT and Energy (Electromagnetic direction).

7: Admission requirements

Admission requires an upper secondary education.

According to the Admission Order, the programme’s specific entry requirements are:

  • English B
  • Physics B
  • Mathematics A (minimum grade 4.0)

8: The programme title in Danish and English

The Bachelor’s programme entitles the graduate to the designation Bachelor (BSc) i teknisk videnskab (robotteknologi). The English designation is: Bachelor of Science (BSc) in Engineering (Robotics).

9: Programme specifications in ECTS credits

The Bachelor’s programme is a 3-year, research-based, full-time study programme. The programme is set to 180 ECTS credits.

10: Rules concerning credit transfer (merit), including the possibility for choice of modules that are part of another programme at a university in Denmark or abroad

The Study Board can approve that passed programme elements from other educational programmes at the same level replaces programme elements within this programme (credit transfer).

Furthermore, the Study Board can, upon application, approve that parts of this programme is completed at another university or a further education institution in Denmark or abroad (pre-approval of credit transfer).

The Study Board’s decisions regarding credit transfer are based on an academic assessment.

11: Exemptions

The Study Board’s possibilities to grant exemption, including exemption to further examination attempts and special examination conditions, are stated in the Examination Policies and Procedures published at this website: https://www.studieservice.aau.dk/regler-vejledninger

12: Rules for examinations

The rules for examinations are stated in the Examination Policies and Procedures published at this website:https://www.studieservice.aau.dk/regler-vejledninger

13: Rules concerning written work, including the Bachelor’s project

In the assessment of all written work, regardless of the language it is written in, weight is also given to the student's formulation and spelling ability, in addition to the academic content. Orthographic and grammatical correctness as well as stylistic proficiency are taken as a basis for the evaluation of language performance. Language performance must always be included as an independent dimension of the total evaluation. However, no examination can be assessed as ‘Pass’ on the basis of good language performance alone; similarly, an examination normally cannot be assessed as ‘Fail’ on the basis of poor language performance alone.

The Study Board can grant exemption from this in special cases (e.g., dyslexia or a native language other than Danish).

The Bachelor’s project must include an English summary. If the project is written in English, the summary can be in Danish. The summary is included in the evaluation of the project as a whole.

14: Requirements regarding the reading of texts in a foreign language

It is assumed that the student can read academic texts in his or her native language as well as in English and use reference works etc. in other European languages

15: Competence profile on the diploma

The following competence profile will appear on the diploma:

A graduate of the Bachelor's programme has competencies acquired through an educational programme that has taken place in a research environment.

A graduate of the Bachelor's programme has fundamental knowledge of and insight into his/her subject's methods and scientific foundation. These properties qualify the graduate of the Bachelor’s programme for further education in a relevant Master’s programme as well as for employment on the basis of the educational programme

16: Competence profile of the programme

The graduate of the Bachelor’s programme:

Knowledge

  • Has knowledge of and insight into fundamental theories, methods, tools and practical subjects within the fields of Robotics
  • Has a firm grasp of the mathematical and programming technical foundations of the field
  • Has knowledge of the interaction between electronic and mechanical systems, including feedback mechanisms, electromechanical systems, software and manipulators
  • Has knowledge of sensors and actuators relevant for the field

Skills

  • Can utilise up-to-date scientific methods, tools and techniques to analyse and solve complex problems in the fields of robotics
  • Can evaluate and compare theoretical and practical problems, as well as describe and select relevant solution strategies
  • Is able to implement such solution strategies and evaluate their success in a systematic manner
  • Is able to present problems and solution strategies within the fields of robotics, in writing as well as orally, to specialists as well as non-specialists in the fields, including external parties, users, etc.

Competencies

  • Is able to handle complex situations that arise in research and/or development-related environments, such as university studies and/or engineering workplaces.
  • Is able to develop and test robotics hardware and software and integrate them into a broader systems-oriented context
  • Can work independently as well as in collaboration with others, both within and across technical fields, in an efficient and professional manner
  • Is able to identify his/her own learning needs and structure his/her own learning in various learning environment

17: Structure and Contents of the programme

The programme is structured in modules and organised as a problem-based study. A module is a programme element or a group of programme elements, which aims to give students a set of professional skills within a fixed time frame specified in ECTS credits, and concluding with one or more examinations within specific exam periods. The examinations are defined in the curriculum.

The programme is based on a combination of academic, problem-oriented and interdisciplinary approaches and organised based on the following work and evaluation methods that combine skills and reflection:

  • lectures
  • classroom instruction
  • project work
  • workshops
  • exercises (individually and in groups)
  • teacher feedback
  • reflection
  • portfolio work

Rules concerning the progress of the Bachelor’s programme

The student must participate in all first year examinations by the end of the first year of study in the Bachelor's programme, in order to be able to continue the programme. The first year of study must be passed by the end of the second year of study, in order that the student can continue his/her Bachelor's programme. In special cases, however, there may be exemption from the above

18: Overview of the programme

All modules are assessed through individual grading according to the 7-point scale or Pass/Fail. All modules are assessed by external examination (external grading) or internal examination (internal grading or assessment by the supervisor only).

Offered as: 1-professional
Study programme: BSc Robotics
Module name Course type ECTS Applied grading scale Evaluation method Assessment method Language
1 Semester
Robot programming
Technological Teamwork (P0)
(ESNROBB1P1)
Project 5 Passed/Not PassedInternal examinationOral exam based on a project English
Fundament Mobile Robotics (P1)
(ESNROBB1P2)
Project 10 7-point grading scaleInternal examinationOral exam based on a project English
Robot Programming
(ESNROBB1K1)
Course 5 Passed/Not PassedInternal examinationWritten or oral exam English
Problem Based Learning in Science, Technology and Society
(ESNROBB1K2)
Course 5 Passed/Not PassedInternal examinationWritten or oral exam English
Linear algebra
(ESNROBB1K3)
Course 5 7-point grading scaleInternal examinationWritten or oral exam English
2 Semester
Manipulator and industrial robotics
Manipulator and Industrial Robotics
(ESNROBB2P1)
Project 15 7-point grading scaleExternal examinationOral exam based on a project English
Robot Mechanics, Modelling, and Simulation
(ESNROBB2K1)
Course 5 7-point grading scaleInternal examinationWritten or oral exam English
Calculus
(ESNROBB2K2)
Course 5 7-point grading scaleInternal examinationWritten or oral exam English
Structered System and Product Development
(ESNROBB2K3)
Course 5 Passed/Not PassedInternal examinationWritten or oral exam English
3 Semester
Manipulating the surroundings
Manipulating the Surroundings
(ESNROBB3P1)
Project 15 7-point grading scaleExternal examinationOral exam based on a project English
Actuators, Drivers and Electronic Modules
(ESNROBB3K1)
Course 5 Passed/Not PassedInternal examinationWritten or oral exam English
Robot Dynamics, Biomechanics and Biological Actuators
(ESNROBB3K2)
Course 5 Passed/Not PassedInternal examinationWritten or oral exam English
Robotic Control Systems
(ESNROBB3K3)
Course 5 7-point grading scaleInternal examinationWritten or oral exam English
4 Semester
Sensing the surroundings
Sensing the Surroundings
(ESNROBB4P1)
Project 15 7-point grading scaleInternal examinationOral exam based on a project English
Robotic Sensing
(ESNROBB4K1)
Course 5 7-point grading scaleInternal examinationWritten or oral exam English
Robotic Perception
(ESNROBB4K2)
Course 5 Passed/Not PassedInternal examinationWritten or oral exam English
Probability Theory and Statistics
(ESNROBB4K3)
Course 5 7-point grading scaleInternal examinationWritten or oral exam English
5 Semester
Robot integration
Robot Integration
(ESNROBB5P1)
Project 15 7-point grading scaleExternal examinationOral exam based on a project English
Software and Automation Frameworks
(ESNROBB5K1)
Course 5 Passed/Not PassedInternal examinationWritten or oral exam English
Productions Systems and Automation
(ESNROBB5K2)
Course 5 7-point grading scaleInternal examinationWritten or oral exam English
Robots in the Health Care System
(ESNROBB5K3)
Course 5 Passed/Not PassedInternal examinationWritten or oral exam English
6 Semester
BSc Robotics
6th semester elective project module
Select 1 of the 2 options
Project 15
Motion Planning and Path Planning
(ESNROBB6K1)
Course 5 Passed/Not PassedInternal examinationWritten or oral exam English
6th semester courses (2 courses)
Choose 2 courses
Course 10

 
6th semester elective project module
Select 1 of the 2 options
Module name Course type ECTS Applied grading scale Evaluation Method Assessment method Language
BSc Project (Robots in an Application Context)
(ESNROBB6P1)
Project 15 7-point grading scale External examination Oral exam based on a project English
BSc Project (Robots in a Theoretical Context)
(ESNROBB6P2)
Project 15 7-point grading scale External examination Oral exam based on a project English

 
6th semester courses (2 courses)
Choose 2 courses
Module name Course type ECTS Applied grading scale Evaluation Method Assessment method Language
Matrix Computations and Convex Optimization
(ESNEITB6K2)
Course 5 Passed/Not Passed Internal examination Written or oral exam Danish and English
Embedded Software Design
(ESNEITB4K2)
Course 5 Passed/Not Passed Internal examination Written or oral exam English
Digital Design
(ESNEITB4K1)
Course 5 Passed/Not Passed Internal examination Written or oral exam English
Biomedical Engineering in an Organizational and Corporate Perspective
(STIST14B6_5)
Course 5 7-point grading scale Internal examination Written or oral exam English
Digital Signal Processing
(STIST18B4_4)
Course 5 7-point grading scale Internal examination Written or oral exam Danish and English

Throughout the semesters students will at an increasing abstraction level be introduced to relevant theories and scientific methods. Scientific theory and scientific methods in general are included in the course Problem based learning in science, technology and society. Moreover, the students develop their skills in this area in their project work, where they will apply scientific methods in practice and reflect on their application.

1st Semester: Commencement of Studies Exam (Studiestartsprøve)

Size:           
The commencement of studies exam does not yield ECTS credits and will not appear on the diploma

The purpose of the commencement of studies exam is to ascertain whether students have actually commenced their studies. The students must participate in and pass the commencement of studies exam in order to continue on their studies. If the students do not participate in or pass the commencement of studies exam or re-exam, the students’ enrollment at their studies will be terminated immediately after the re-exam.

The commencement of studies exam will be held within the first weeks of the semester.

Contents:
The commencement of studies exam is based on the instruction course and contains for instance general questions about the students’ expectations and motivation for their choice of studies.

Re-exam:
There will be only one commencement of studies re-exam. If the students do not participate in or do not pass the commencement of studies exam or re-exam, the students’ studies will be terminated before 1 October. The Study Board can grant exemption from the rules regarding the commencement of studies exam if there are unusual circumstances.

Examination format:
Written exam

Assessment:
Internal assessment. The students receive the assessment “Approved” or “Not approved” based on their answers to the written exam. The students receive the assessment “Approved” when the written exam is answered and handed in.

Appeal:
The students can complain about the commencement of studies exam to the University. The complaint must be submitted to the University within two weeks from the result of the commencement of studies exam is announced. If the University rejects the complaint, the decision may be appealed to the Danish Agency of Science and Higher Education, if the appeal concerns legal issues.

19: Additional information

The current version of the curriculum is published on the study board's website, including more detailed information about the Programme, including exams.

20: Commencement and transitional rules

The curriculum is approved by the dean and enters into force as of September 2018.

Students who wish to complete their studies under the previous curriculum from 2014 must conclude their education by the summer examination period 2018 at the latest, since examinations under the previous curriculum are not offered after this time.

21: Amendments to the curriculum and regulations

Minor editorial changes have made in connection with the digitisation of the study curriculum.

23rd January 2019: It is required that the student has received minimum the grade 4.0 in Mathematics A to be entitled to admission from 1st September 2019.